-
NanoGrout GP50/CONMIX LTD/2026-03-17
NanoGrout GP50 is supplied as ready to use dry powder requiring only the addition of water to produce free flow, non-shrink, high strength cementitious grout. The key additives impart controlled expansion, water reduction and free flow…
-
NanoGrout CFG/CONMIX LTD/2026-03-17
NanoGrout CFG is a ready to use, high strength, highly flowable, non-shrink cementitious grout. It requires only addition of water at site. It consists of portland cement and special chemicals for non-shrinkage properties, high fluidity…
-
ReCon GP55/CONMIX LTD/2026-03-17
ReCon GP55 is a ready to use single component polymer modified repair mortar containing fibres and silica fume. It contains specially selected materials to provide a fine, smooth repaired surface. ReCon GP55 is formulated for sprayed or…
-
JetCure R/CONMIX LTD/2026-03-17
JetCure R is a single-component, water-based, acrylic polymer–based membrane-forming curing compound designed to promote optimum cement hydration and surface protection of freshly placed concrete. When applied by spray, it forms a…
-
MegaAdd CGA/CONMIX LTD/2026-03-17
MegaAdd CGA is a single-component, liquid alkaline accelerator formulated primarily from sodium silicate solution and water for use in cementitious grouts, mortars, and slurries where rapid setting and early strength development are…
-
NanoGrout PT-938/CONMIX LTD/2026-03-17
NanoGrout PT-938 is a single-component, cementitious, non-shrink flow grout supplied as a dry powder and designed primarily for non-gaseous post-tensioned cable duct grouting and related precision grouting applications. The formulation…
-
NanoGrout SG/CONMIX LTD/2026-03-17
NanoGrout SG is a high-performance, two-component, epoxy-based structural adhesive and anchor grout designed for anchoring, bonding, and precision structural fixing applications. The system is supplied in paste and pourable grades and…
-
ReCon PH 2K/CONMIX LTD/2026-03-17
ReCon PH (2K) is a two-component, polymer-modified cementitious fairing and repair mortar designed for non-structural surface reprofiling of concrete and masonry. Supplied as a powder and liquid system, it is mixed on site to produce a…
-
NanoGrout EG/CONMIX LTD/2026-03-17
NanoGrout EG is a high-performance, non-shrink epoxy grout designed for precision grouting applications where high mechanical strength, durability, and chemical resistance are critical. Formulated from epoxy resin, reactive hardeners…
-
ReCon MC5mm/CONMIX LTD/2026-03-17
ReCon MC5mm is a pre-mixed, cement-based, non-shrink structural micro concrete supplied as a single-component grey powder, designed for large-volume grouting and concrete repair applications. Formulated with Ordinary Portland Cement (OPC)…
