-
Metal Lath with D-Paper/CEMCO/2025-09-18
This HPD covers CEMCO Metal Lath products with D-Paper, including Diamond Products (1.75, 2.5, and 3.4; Flat, Dimpled, and Grooved), and 1/8" Flat Rib Products (1/8" Riblath). All CEMCO Metal Lath products are produced from standard G60…
-
Sure-Board Series 200W/CEMCO/2025-09-08
Sure-Board® Series 200W for Steel framing and Series 200W for Wood Framing are steel sheet and medium density fiberboard (MDF) composite products that are installed on steel or wood framed shear walls at points requiring shear. Sure-Board®…
-
SureBoard Series 200 Series 200B/CEMCO/2025-06-03
Sure-Board® has a gypsum board facing that integrates with standard gypsum board for a smooth uninterrupted finish. Sure-Board® requires no leveling and is ready for finishes. Sure-Board® lays flat on the stud surface with no sagging…
-
Structural Curtain Wall Studs Track/CEMCO/2025-03-05
CEMCO Exterior Structural Studs and Track are manufactured from mill certified steel, and are designed for use in curtain-wall and load bearing applications. Thicknesses range from 33 mil (20 ga) to 118 mil (10 ga). Flange or leg sizes for…
-
SureSpan Floor Joists/CEMCO/2025-02-21
CEMCO’s Sure-Span® steel floor joist system is a patented, tested, and approved solution for commercial, mid-rise, and residential floor framing assemblies. Sure-Span floor joists are manufactured with extra large openings (punch-outs) to…
-
Metal Lath with KPaper/CEMCO/2025-02-20
This HPD covers CEMCO Metal Lath products with K-Paper. CEMCO’s CEM-MESH Flat-Rib with K-Paper is a more rigid lath with 1/8" longitudinal ribs spaced at 3" on-center that provide for wider spacing between wooden or metal supports. Backed…
-
ViperX Interior NonStructural Studs and Tracks/CEMCO/2025-02-07
The Viper-X® Drywall Framing System offers all the benefits of conventional flat steel studs and tracks with a design that performs even better. Viper-X Interior Non-Structural Studs and Track consist of 100% hot-dip galvanized steel, and…
-
Metal Lath/CEMCO/2025-02-07
This HPD covers all CEMCO Metal Lath products without paper backing, including Expanded, Self-Furred, CEM- MESH, Flat-Ribbed, and Hi-Ribbed Metal Lath. All CEMCO Metal Lath products are produced from standard G60 hot-dipped galvanized…
-
CT Shaft Wall System/CEMCO/2025-02-07
The CT Shaft Wall System is CEMCO's solution for fire-rated shaft walls, stairwells, and horizontal ceilings. Available in web depths of 2-1/2", 4" and 6" in 20 gauge (33 mil), and 18 gauge (43 mil) thicknesses with corresponding J-Tracks…
-
ProX Header/CEMCO/2024-12-05
ProX Header® is a superior header system that provides a winning combination of simple code compliance, easy member selection, and fast installation. ProX Header is a light gauge steel header that provides horizontal and vertical load…
-
Head of Wall Slotted Tracks/CEMCO/2024-11-05
CEMCO’s "CST" Brand Slotted Track is evaluated and approved for use by ICC in report ESR-2012, and is available with optional drift slots. Produced from G40 (18 and 33 mil) and G60 (43, 54, 68 mil) coated steel, CEMCO CST Slotted Track is…
-
ViperStud ViperTrack/CEMCO/2024-10-07
The ViperStud® Drywall Framing System offers all the benefits of conventional flat steel studs with a design that performs even better. ViperStuds and ViperTracks consist of 100% hot-dip galvanized steel, and are used for framing of…
