HPD Public Repository

COLPHENE 3000 is a self-adhesive, sheet-applied waterproofing membrane composed of SBS-modified bitumen and a tri-laminate woven polyethylene facer used on foundation walls and other below grade vertical surfaces.

Aussie Mate 580-AL and 580-PL are 60-mil, self-adhered, bituminous sheet waterproofing membranes designed for below-grade waterproofing applications. 580-AL incorporates an aluminum facer/protection layer, while 580-PL incorporates a poly…

COLPHENE ICF is a self-adhesive, sheet-applied membrane composed of SBS-modified bitumen and a tri-laminate woven polyethylene facer used for damproofing and waterproofing on Insulated Concrete Forms foundation walls.

MiraWELD is an adhesively bonded pre-applied waterproofing solution with welded seams that is typically used for high-risk projects like hospitals, museums, and computer centers. It is best used for below-grade applications on foundation…

MiraPLY is a a nominal, 60-mil self-adhering, pre-applied (blindside) waterproofing membrane. The dual laminate membrane fuses a 45-mil, gray, reinforced TPO sheet to a 15-mil, white, trafficable, pressure sensitive adhesive.

Solvent-Based VOC Adhesive

enry 606 80# Premium SBS Modified Mineral-Surfaced Underlayment is a fire-rated cap sheet for quality built-up roofing systems and is formulated for cold weather applications. Additionally, this cap sheet is manufactured on tested…

3M™ Air Barrier with Permeable Backing 3015VP is a self-adhered vapor permeable, wind and water resistant membrane with an aggressive acrylic adhesive and a breathable film. Primer is not required on most construction surfaces. This…

3M™ Air and Vapor Barrier 3015NP is an air, moisture and water impermeable film membrane with an aggressive, high-tack pressure sensitive acrylic adhesive. It reduces air leakage and uncontrolled airflow from the building envelope…

Detail Tape WRM is a strong, pliable, self-adhesive sheet consisting of a 4 mil cross-laminated, high-density polyethylene (HDPE) backing, bonded to 56 mils of rubberized-asphalt waterproofing compound.

The US Inside Corner Boot, Outside Corner Boot or Pit Top Boot is a 60-mil combination of rubberized asphalt bonded to polyethylene.

Underslab Membrane is used as a waterproofing membrane/vapor barrier to virtually eliminate water and vapor transmission through concrete slabs on grade. In addition to protecting floor finishes and indoor air quality, Underslab Membrane…

Blindside™ Membrane is used as a waterproofing membrane where vertical, positive-side waterproofing is required, but access to the positive side is impossible due to the soil retention system. In addition to protecting indoor air quality…

650 PRM is used on concrete foundation walls, mud slabs, sills and spandrel beams, tunnels, plaza decks, parking garages and related applications where waterproofing is critical. Polyguard 650 PRM may also be used on wood, concrete masonry…

650 WRM is a strong, pliable, self-adhesive sheet consisting of a 4-mil cross-laminated, high-density polyethylene (HDPE) backing, bonded to 56 mils of rubberized asphalt waterproofing compound.